918087133225 918087133225
Pragati Paints & Allied Products

Epoxy Inorganic Zinc Silicate

Epoxy Inorganic Zinc Silicate

MOQ : 10 Litre

Business Type Manufacturer, Supplier, Retailer
Packaging Details 5/10/20 LITERS

Preferred Buyer From

Location Anywhere in India

We are ranked among Manufacturers & Suppliers of premium Epoxy Inorganic Zinc Silicate in Pune, Maharashtra, India. Our Epoxy Inorganic Zinc Silicate is excellent for protecting metal surfaces from corrosion. It is a great primer used in various industries. Our company manufactures Epoxy Inorganic Zinc Silicate using up-to-date technologies with superior-grade raw materials. Buyers can order Epoxy Inorganic Zinc Silicate as per requirement and expect on-time delivery. 


Scope : A dual pack Paint possessing excellent durability & Weather properties. The product is designed to withstand a constant.


 Use : Recommended for use outside structural steel etc.


Product Data :

  • Type : Two Pack, cured with polyamide
  • Composition : Epoxy resin/metallic zinc with silicon vehicle
  • Application: Brush / Conventional spray.
  • Recommended DFT : 50-60 microns. per coat.
  • Theoretical Spreading Rate : 9.0-12.8 Sq. meter/Liter.
  • Practical Spreading Rate : 6-7 Sq. meter/liter.
  • Drying Time :
    Recoating : Minimum : 6-8 hrs.
    • Surface Dry : 50 mins.
    • Tack Free : 2 hrs.
    • Handle : 4-5 hrs.
    • Hard Dry : Overnight.
    • Complete cure : 7 days
  • Flash Point : Above 30°C.
  • Colour : Grey
  • Thinner : Pragati Make Epoxy Thinner ( PPCOAT EPX T200)
  • Finish : Smooth & Matt.
  • Temperature Resistance : continuous 200°C.
  • Weatherability : Excellent.
  • Flexibility : Excellent.0
  • Storage Life : Up to 9 month in intact condition or sealed the containers are kept under cover in a dry place under normal temperature conditions.


Surface Preparation : Make full use of mechanical tools along with manual chipping & Wire brushing to remove loose particle rust sanding to Sa2 ½ sand paper. Excessive burnishing of steel is to be avoided.

Application : Stir well when apply. To mix proper by manual or machine tool stirrer & apply brush, apply airless gun for achieved recommended DFT.
Resistance Guide : 

  • Salt : Good
  • Water : Good.
  • Chemical : Fair


Note :

  • The mix primer must be used off within 3 hours for obtaining better finish.
  • Do not apply when temperature falls below 10°C & when relative humidity rises above 90% do not apply during rain Fog or mist.

Yes! I am interested

Looking for "Epoxy Inorganic Zinc Silicate" ?

  • Explore More Products